Reliable Toilet Replacement in Mineral Ridge, OH

Step-by-Step Overview of the Replacement Process

Replacing a toilet is not complicated in concept, but it does require careful attention at each step. A mistake with the seal or the bolts can cause leaks, wobbling, or damage to the flooring. Here is an overview of the process:

• Shut off the water supply. The valve is usually located near the wall behind the toilet. Once closed, the toilet is flushed to drain the tank and bowl, then a sponge is used to remove any remaining water.
• Disconnect the water line. An adjustable wrench loosens the nut where the supply line connects to the tank.
• Remove the old toilet. The bolt caps are taken off, the nuts are unscrewed, and the toilet is gently rocked back and forth until it breaks the seal. Once lifted off, it’s set aside on a towel.
• Clean the flange. Old wax gets scraped away with a putty knife. The flange is inspected for cracks or damage. If broken, it may need repair or replacement before the new toilet can be set.
• Install new hardware. New closet bolts are placed into the flange slots and positioned evenly across from each other.
• Set the wax ring. The new wax ring gets pressed onto the toilet outlet or directly on the flange, depending on preference.
• Position the new toilet. The toilet bowl is carefully lowered onto the bolts and carefully centered, then pressed down firmly to seat it onto the wax ring.
• Secure the bolts. Nuts are tightened evenly by alternating each side to avoid cracking the porcelain.
• Reconnect the tank and seat. If the toilet is a two-piece unit, the tank is attached to the bowl, and the seat is installed.
• Reconnect the water line. The supply line gets attached, and the nut is tightened.
• Test the toilet. The water valve gets turned back on, then the toilet is flushed several times to make sure there are no leaks around the base or connections.
• Seal the base. A thin line of caulk is applied around the bottom to prevent water from seeping underneath.

Why Call a Professional for Help?

Homeowners can handle small maintenance tasks, but a full toilet installation in Mineral Ridge is normally best left to a professional plumber. Toilets are heavy and awkward to move. A small mistake when setting the wax ring can create leaks that go unnoticed until they cause major water damage. An uneven installation can lead to cracks in the porcelain or loosened seals. Professionals also have experience with unexpected issues. A flange may be corroded, misaligned, or set too low. Drain pipes may not line up properly with the new fixture. These problems are hard to fix without training and the right tools. A qualified plumber knows how to handle these challenges quickly and correctly. Calling a professional avoids the hassle of multiple trips to the hardware store and the stress of figuring out what went wrong if the toilet does not sit properly. A trained toilet installer can make sure that everything is fitted, sealed, and working from the start.

Are You Searching for Professional Toilet Installation in Mineral Ridge, OH?

If your current toilet has reached the end of its life or you’re ready for an upgrade, reach out to Mr. Rooter Plumbing today. We offer reliable toilet replacement in Mineral Ridge, Ohio. Our team has the right tools, training, and experience to make sure the job is done right the first time. Call us to schedule your next toilet installation or toilet repair in Mineral Ridge or another local neighborhood.